BGJZX - PR-1321 CLASS B

Product Identification

Product ID:PR-1321 CLASS B
MSDS Date:01/01/1985
FSC:8030
NIIN:01-065-9159
MSDS Number: BGJZX

Responsible Party
PRODUCTS RESEARCH & CHEMICAL CORPORATION

Emergency Phone: (213)240-2060

Cage: DO563

Contractor
PRODUCTS RESEARCH & CHEMICAL
1800 GLENDALE, CA 91209 US

Telephone: 818-240-2060

Cage: DO563

Ingredients

LEAD DIOXIDE(TLV FOR LEAD,INORG,FUMES & DUST)

Fraction By Weight: 7%

ACGIH TLV: 0.15 MG/CUM


POLYSULFIDE POLYMER

Fraction By Weight: 66%


PIGMENTS

Fraction By Weight: 23%


RESINS & PLASTICIZERS

Fraction By Weight: 4%

Hazards

Effects of Overexposure:SKIN:IRRITATING. ACCELERATOR CONTAINS A LEAD
CMPD WHICH MAY BE ABSORBED THROUGH BREAKS IN SKIN.

First Aid

First Aid:SKIN:WASH THOROUGHLY WITH SOAP & WATER. EYE:WASH OUT
IMMEDIATELY WITH WATER FOR 15 MINS. SEE A MD.

Fire Fighting

Flash Point:>200F PMCC
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:DRY CHEMICAL, FOAM, CO*2
Fire Fighting Procedures:WEAR CHEM CARTRIDGE RESPIRATOR WHILE FIGHTING
FIRES.
Unusual Fire/Explosion Hazard:CAN EMIT TOXIC VAPORS

Accidental Release

Spill Release Procedures:STOP LEAK AT SOURCE.ELIMINATE IGNITION
SOURCES.KEEP UNPROTECTED PERSONS AWAY FROM HAZARD AREA.ABSORB SPILL
WITH RAGS OR OTHER ABSORBENT MATL.CLEAN AREA WITH METHYL ETHYL
KETONE.PLACE IN CONTAINERS WIT H TIGHT SEAL.

Handling

Handling and Storage Precautions:KEEP CLOSED CONTAINERS IN SHELTERED
AREA.AVOID FIRE HAZARDS.PROTECT FROM PHYSICAL DAMAGE.
Other Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN FLAME. AVOID
PROLONGED OR REPEATED SKIN CONTACT.

Exposure Controls

Ventilation:LOCAL ADEQUATE TO MINIMIZE SOLVENT VAPORS
Protective Gloves:GLVS OR HND CRM
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health
MFG SUGGESTS TLV OF 200 PPM

Chemical Properties

HCC:N1
Spec Gravity:1.53
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWN PASTE,NO SIGNIFICANT ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
CAN REACT WITH REDUCING MATERIALS
Hazardous Decomposition Products:OXIDES OF SULFUR;HYDROGEN
SULFIDE;FORMIC ACID

Disposal

Waste Disposal Methods:PLACE ABSORB MATL IN CLOSED CONTAINERS AND
DISPOSE IN ACCORDANCE WITH LOCAL,STATE,AND FEDERAL REGULATIONS.DO
NOT INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.